FUCHS LUBRITECH - Die Casting - Release Agents
The release agents of the LUBRODAL series ensure
excellent releasing, high tool life and best part quality.
Wetting, lubrication and cooling have been taken to
account during development as well as economics. Due to high dilution ratios, our release agents enable an efficient
way of working and prevent residues on the part or in the
tools.
Mould release agent for aluminium die casting
LUBRODAL AL 50 MOULD RELEASE AGENT FOR ALUMINIUM DIE CASTING
| Description |
Application Method |
Mixing ratio |
Packages |
Frost-sensitive |
| Milky emulsion, applied in spray form as mould lubricant for the die casting of
aluminium and other non-ferrous metals. LUBRODAL AL 50 contains active
agents with very good release and lubrication properties. The good spreading
properties enable the distribution of the lubricant in the form of a thin layer over
the die casting mould. |
Spraying |
1:40 to 1:80 |
25/200/1000 kg |
yes |
LUBRODAL AL 80 MOULD RELEASE AGENT FOR ALUMINIUM AND ZINC DIE CASTING
| Description |
Application Method |
Mixing ratio |
Packages |
Frost-sensitive |
| Water based concentrate for die casting of aluminium, zinc and other nonferrous
metals. LUBRODAL AL 80 contains active agents with high thermal
stability and forms no build-ups or residues in and next to the moulds.
Recommended values for aluminium die casting are dilution ratios 1:70 up to
1:110. |
Spraying |
1:70 to 1:110 |
25/200/1000 kg |
yes |
LUBRODAL AL 100 MOULD RELEASE AGENT FOR ALUMNIUM AND ZINC DIE CASTING
| Description |
Application Method |
Mixing ratio |
Packages |
Frost-sensitive |
| Emulsion concentrate, to be diluted with water. Generates a closed and well
adhesive lubrication film after spraying. Forms no build-ups and has outstanding
wetting properties. This ensures clean and economical working. The dilution
ratio is application dependent. |
Spraying |
1:80 to 1:120 |
25/200/1000 kg |
yes |
LUBRODAL BKR 100 DIE CASTING RELEASE AGENT
| Description |
Application Method |
Mixing ratio |
Packages |
Frost-sensitive |
| Emulsion concentrate, which provides excellent wetting and cooling of the
moulds. LUBRODAL BKR 100 is of high thermal stability, is pyrolized residue-free
und forms no build-ups. Economic use due to high dilution ratios with water. |
Spraying |
1:80 to 1:120 |
25/200/1000 kg |
yes |
Mould release agent for aluminium die casting
LUBRODAL C 35/30 MOULD RELEASE AGENT FOR ALUMINIUM AND ZINC DIE CASTING
| Description |
Application Method |
Mixing ratio |
Packages |
Frost-sensitive |
| The concentrate is an emulsion of modified oils in water. A balanced additive
combination is guaranteeing excellent lubricating and releasing properties.
LUBRODAL C 35/30 was specially developed for economic lubrication and
releasing in the die casting of aluminium and zinc alloys. Values for the mixing
ratio are for aluminium: 1:30 up to 1:60 and for zinc: 1:50 up to 1:80. |
Spraying |
1:30 to 1:80 |
25/200/950 kg |
yes |
LUBRODAL C 35/40 MOULD RELEASE AGENT FOR ALUMINIUM DIE CASTING
| Description |
Application Method |
Mixing ratio |
Packages |
Frost-sensitive |
| Emulsion of modified oils in water with a harmonized combination of additives
for optimum lubrication and releasing. LUBRODAL C 35/40 was designed
especially for economical lubrication and releasing during aluminium pressure die
casting and has excellent wetting properties. Values for the mixing ratio with
water are 1:50 up to 1:120. |
SSpraying |
1:50 to 1:120 |
25/200/1000 kg |
yes |
LUBRODAL C 100/74 MOULD RELEASE AGENT FOR PRESSURE DIE CASTING
| Description |
Application Method |
Mixing Ratio |
Packages |
Frost-sensitive |
| Stable emulsion concentrate, used as a sprayable mould release agent for pressure
casting of aluminium, magnesium and other non-ferrous metals. Active agents
with high release effects spread fast over tool surfaces due to excellent wetting
properties. LUBRODAL C 100/74 effectively reduces residues and sticking on the
moulds. |
Spraying |
1:70 to 1:110 |
25/200 kg |
yes |
Mould release agent for aluminium and magnesium die casting
LUBRODAL AL 100/21 MOULD RELEASE AGENT FOR ALUMINIUM AND MAGNESIUM DIE CASTING
| Description |
Application Method |
Mixing ratio |
Packages |
Frost-sensitive |
| Stable emulsion concentrate applied as a mould lubricant in spray form for the
die casting of aluminium, magnesium and other non-ferrous metals. The use of
LUBRODAL AL 100/21 greatly reduces pore formation. Recommended values for
aluminium die casting are dilution ratios are 1:80 up to 1:140. |
Spraying |
1:80 to 1:140 |
25/200/1000 kg y |
yes |
LUBRODAL C 100 SF MOULD RELEASE AGENT FOR ALUMINIUM AND MAGNESIUM DIE CASTING
| Description |
Application Method |
Mixing ratio |
Packages |
Frost-sensitive |
| Siloxane-free emulsion concentrate for the die casting of aluminium, magnesium
and other non-ferrous metals. LUBRODAL C 100 SF does not form any residues or
build-ups in and near the moulds. The dilution ratio depends upon the die casting
and spraying characteristics and particularly depends upon the mould temperature
and degree of difficulty of the cast part. Values for the dilution ratio are for
aluminium: 1:80 up to 1:120 and for magnesium: 1:60 up to 1:80. |
Spraying |
1:60 to 1:120 |
25/200/1000 kg |
yes |
Minimum quantity lubrication agent for aluminium die casting
HYKOGEEN RLP 100 MINIMUM QUANTITY LUBRICATION AGENT FOR ALUMINIUM DIE CASTING
| Description |
Application Method |
Mixing ratio |
Packages |
Frost-sensitive |
| HYKOGEEN RLP 100 is a mixture of high-grade oils, used for the minimum
quantity lubrication during aluminium die casting. Due to the abdication of a
carrier medium, wetting of even very hot tools is possible. The use of modern,
automatic spraying equipment ensures economic working. | Spraying
(minimum
quantity
lubrication) |
undiluted |
10/180 kg |
yes |
Mould release agent for zinc die casting
HYKOGEEN ZN 10 MOULD RELEASE AGENT FOR ZINC DIE CASTING
| Description |
Application Method |
Mixing ratio |
Packages |
Frost-sensitive |
| Ready for use, non-water-miscible mould release agent for zinc die casting.
HYKOGEEN ZN 10 is primarily applied with an automatic spray system. Due
to its excellent releasing properties, sparingly application is sufficient. | Spraying |
undiluted |
20/150/750 kg |
no |
HYKOGEEN ZN 15 MOULD RELEASE AGENT FOR ZINC DIE CASTING
| Description |
Application Method |
Mixing ratio |
Packages |
Frost-sensitive |
| Non-water-miscible mould release agent specifically for zinc die casting, primarily
applied with an automatic spray system. HYKOGEEN ZN 15 is ready for use and
has outstanding releasing properties. |
Spraying |
undiluted |
20/160/800 kg |
no |
